Current Build

Переводит команда Health Samurai. Приглашаем поучаствовать в русификации стандарта FHIR: GitHub, Email.

Devicemetric.profile.json

Health Care Devices Work GroupMaturity Level: N/ABallot Status: InformativeCompartments: Not linked to any defined compartments

Raw JSON (каноническая форма + also see JSON Format Specification)

StructureDefinition for devicemetric

{
  "resourceType" : "StructureDefinition",
  "id" : "DeviceMetric",
  "meta" : {
    "lastUpdated" : "2019-05-17T12:34:53.932+00:00"
  },
  "text" : {
    "status" : "generated",
    "div" : "<div>!-- Snipped for Brevity --></div>"
  },
  "extension" : [{
    "url" : "http://hl7.org/fhir/StructureDefinition/structuredefinition-standards-status",
    "valueCode" : "trial-use"
  },
  {
    "url" : "http://hl7.org/fhir/StructureDefinition/structuredefinition-fmm",
    "valueInteger" : 1
  },
  {
    "url" : "http://hl7.org/fhir/StructureDefinition/structuredefinition-security-category",
    "valueCode" : "anonymous"
  },
  {
    "url" : "http://hl7.org/fhir/StructureDefinition/structuredefinition-wg",
    "valueCode" : "dev"
  }],
  "url" : "http://hl7.org/fhir/StructureDefinition/DeviceMetric",
  "version" : "3.6.0",
  "name" : "DeviceMetric",
  "status" : "draft",
  "date" : "2019-05-17T12:34:53+00:00",
  "publisher" : "Health Level Seven International (Health Care Devices)",
  "contact" : [{
    "telecom" : [{
      "system" : "url",
      "value" : "http://hl7.org/fhir"
    }]
  },
  {
    "telecom" : [{
      "system" : "url",
      "value" : "http://www.hl7.org/Special/committees/healthcaredevices/index.cfm"
    }]
  }],
  "description" : "Describes a measurement, calculation or setting capability of a medical device.",
  "fhirVersion" : "3.6.0",
  "mapping" : [{
    "identity" : "w5",
    "uri" : "http://hl7.org/fhir/fivews",
    "name" : "FiveWs Pattern"
  },
  {
    "identity" : "rim",
    "uri" : "http://hl7.org/v3",
    "name" : "RIM Mapping"
  }],
  "kind" : "resource",
  "abstract" : false,
  "type" : "DeviceMetric",
  "baseDefinition" : "http://hl7.org/fhir/StructureDefinition/DomainResource",
  "derivation" : "specialization",
  "snapshot" : {
    "element" : [{
      "id" : "DeviceMetric",
      "path" : "DeviceMetric",
      "short" : "Измерение, вычисление или возможные настройки медицинского изделия",
      "definition" : "Describes a measurement, calculation or setting capability of a medical device.",
      "comment" : "For the initial scope, this DeviceMetric resource is only applicable to describe a single metric node in the containment tree that is produced by the context scanner in any medical device that implements or derives from the ISO/IEEE 11073 standard.",
      "min" : 0,
      "max" : "*",
      "base" : {
        "path" : "DeviceMetric",
        "min" : 0,
        "max" : "*"
      },
      "constraint" : [{
        "key" : "dom-2",
        "severity" : "error",
        "human" : "Если ресурс встроен в другой ресурс, он НЕ ДОЛЖЕН содержать описательной части",
        "expression" : "contained.contained.empty()",
        "xpath" : "not(parent::f:contained and f:contained)",
        "source" : "DomainResource"
      },
      {
        "key" : "dom-4",
        "severity" : "error",
        "human" : "Если ресурс встроен в другой ресурс, он НЕ ДОЛЖЕН иметь meta.versionId или meta.lastUpdated",
        "expression" : "contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()",
        "xpath" : "not(exists(f:contained/*/f:meta/f:versionId)) and not(exists(f:contained/*/f:meta/f:lastUpdated))",
        "source" : "DomainResource"
      },
      {
        "key" : "dom-3",
        "severity" : "error",
        "human" : "Если ресурс встроен в другой ресурс, где-то в родительском ресурсе на него ДОЛЖНА БЫТЬ дана ссылка or SHALL refer to the containing resource",
        "expression" : "contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()",
        "xpath" : "not(exists(for $contained in f:contained return $contained[not(parent::*/descendant::f:reference/@value=concat('#', $contained/*/id/@value) or descendant::f:reference[@value='#'])]))",
        "source" : "DomainResource"
      },
      {
        "extension" : [{
          "url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice",
          "valueBoolean" : true
        },
        {
          "url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bestpractice-explanation",
          "valueMarkdown" : "When a resource has no narrative, only systems that fully understand the data can display the resource to a human safely. Including a human readable representation in the resource makes for a much more robust eco-system and cheaper handling of resources by intermediary systems. Some ecosystems restrict distribution of resources to only those systems that do fully understand the resources, and as a consequence implementers may believe that the narrative is superfluous. However experience shows that such eco-systems often open up to new participants over time."
        }],
        "key" : "dom-6",
        "severity" : "warning",
        "human" : "A resource should have narrative for robust management",
        "expression" : "text.div.exists()",
        "xpath" : "exists(f:text/h:div)",
        "source" : "DomainResource"
      },
      {
        "key" : "dom-5",
        "severity" : "error",
        "human" : "If a resource is contained in another resource, it SHALL NOT have a security label",
        "expression" : "contained.meta.security.empty()",
        "xpath" : "not(exists(f:contained/*/f:meta/f:security))",
        "source" : "DomainResource"
      }],
      "isModifier" : false,
      "isSummary" : false,
      "mapping" : [{
        "identity" : "rim",
        "map" : "Entity. Role, or Act"
      }]
    },
    {
      "id" : "DeviceMetric.id",
      "path" : "DeviceMetric.id",
      "short" : "Logical id of this artifact",
      "definition" : "The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.",
      "comment" : "The only time that a resource does not have an id is when it is being submitted to the server using a create operation.",
      "min" : 0,
      "max" : "1",
      "base" : {
        "path" : "Resource.id",
        "min" : 0,
        "max" : "1"
      },
      "type" : [{
        "code" : "id"
      }],
      "isModifier" : false,
      "isSummary" : true
    },
    {
      "id" : "DeviceMetric.meta",
      "path" : "DeviceMetric.meta",
      "short" : "Метаданные ресурса",
      "definition" : "Метаданные ресурса. Это такая информация, которая поддерживается инфраструктурой. Изменения этой информации не всегда можно ассоциировать с версионными изменениями ресурса.",
      "min" : 0,
      "max" : "1",
      "base" : {
        "path" : "Resource.meta",
        "min" : 0,
        "max" : "1"
      },
      "type" : [{
        "code" : "Meta"
      }],
      "isModifier" : false,
      "isSummary" : true
    },
    {
      "id" : "DeviceMetric.implicitRules",
      "path" : "DeviceMetric.implicitRules",
      "short" : "Свод правил, в соответствии с которыми создавалось это содержимое",
      "definition" : "Ссылка на свод правил, которым следовали при создании этого ресурса и которые необходимо понимать при обработке этого содержимого. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.",
      "comment" : "Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.",
      "min" : 0,
      "max" : "1",
      "base" : {
        "path" : "Resource.implicitRules",
        "min" : 0,
        "max" : "1"
      },
      "type" : [{
        "code" : "uri"
      }],
      "isModifier" : true,
      "isModifierReason" : "This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation",
      "isSummary" : true
    },
    {
      "id" : "DeviceMetric.language",
      "path" : "DeviceMetric.language",
      "short" : "Язык содержимого ресурса",
      "definition" : "Основной язык, на котором написан ресурс.",
      "comment" : "Язык указывается для поддержки предварительной обработки текстов и доступности для понимания (например при преобразовании текста в речь используется языковой тег). HTML-тег language в описательной части применяется к этой описательной части. Языковой тег ресурса может использоваться для указания языков других представлений, генерируемых из данных ресурса\n\nНе все содержание ресурса должно быть на указанном основном языке. Resource.language нельзя автоматически принимать за язык описательной части. Если язык указан, его также следует указать в элементе div в HTML (информацию о связи между xml:lang и HTML-атрибутом lang см. в правилах HTML5).",
      "min" : 0,
      "max" : "1",
      "base" : {
        "path" : "Resource.language",
        "min" : 0,
        "max" : "1"
      },
      "type" : [{
        "code" : "code"
      }],
      "isModifier" : false,
      "isSummary" : false,
      "binding" : {
        "extension" : [{
          "url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-maxValueSet",
          "valueCanonical" : "http://hl7.org/fhir/ValueSet/all-languages"
        },
        {
          "url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
          "valueString" : "Language"
        },
        {
          "url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-isCommonBinding",
          "valueBoolean" : true
        }],
        "strength" : "preferred",
        "description" : "Естественный язык.",
        "valueSet" : "http://hl7.org/fhir/ValueSet/languages"
      }
    },
    {
      "id" : "DeviceMetric.text",
      "path" : "DeviceMetric.text",
      "short" : "Краткое текстовое изложение ресурса для интерпретации человеком",
      "definition" : "Человекочитаемая описательная часть, содержащая краткое изложение ресурса, которая может использоваться для представления содержимого ресурса человеку. От описательной части не требуется кодировать все структурированные данные, но она должна содержать достаточно сведений, чтобы простое её прочтение человеком было \"клинически безопасным\". Определения ресурсов могут описывать, какое содержимое должно быть представлено в описательной части для обеспечения клинической безопасной.",
      "comment" : "Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied).  This may be necessary for data from legacy systems where information is captured as a \"text blob\" or where text is additionally entered raw or narrated and encoded information is added later.",
      "alias" : ["narrative",
      "html",
      "xhtml",
      "display"],
      "min" : 0,
      "max" : "1",
      "base" : {
        "path" : "DomainResource.text",
        "min" : 0,
        "max" : "1"
      },
      "type" : [{
        "code" : "Narrative"
      }],
      "isModifier" : false,
      "isSummary" : false,
      "mapping" : [{
        "identity" : "rim",
        "map" : "Act.text?"
      }]
    },
    {
      "id" : "DeviceMetric.contained",
      "path" : "DeviceMetric.contained",
      "short" : "Вложенные, встроенные инлайн ресурсы",
      "definition" : "Эти ресурсы не обладают независимым существованием вне ресурса, который их содержит - их нельзя идентифицировать независимо, и они не могут иметь своей собственной независимой транзакционной области действия.",
      "comment" : "Этого не следует делать, когда содержимое может быть идентифицировано должным образом, поскольку, потеряв идентификацию, будет чрезвычайно сложно (и контекстно-зависимо) снова восстановить её. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.",
      "alias" : ["inline resources",
      "anonymous resources",
      "contained resources"],
      "min" : 0,
      "max" : "*",
      "base" : {
        "path" : "DomainResource.contained",
        "min" : 0,
        "max" : "*"
      },
      "type" : [{
        "code" : "Resource"
      }],
      "isModifier" : false,
      "isSummary" : false,
      "mapping" : [{
        "identity" : "rim",
        "map" : "N/A"
      }]
    },
    {
      "id" : "DeviceMetric.extension",
      "path" : "DeviceMetric.extension",
      "short" : "Дополнительное содержимое, определенное реализаторами",
      "definition" : "Может использоваться для представления дополнительной информации, не являющейся частью базового определения ресурса. Чтобы сделать использование расширений надежным и управляемым, существует строгий набор управления применительно к определению и использованию расширений. Хотя каждому реализатору разрешается определять расширения, имеется набор требований, которые должны выполняться в рамках определения расширения.",
      "comment" : "Не должно быть никаких предрассудков по использованию расширений любыми приложениями, проектами или стандартами - вне зависимости от учреждения или юрисдикции, которые используют или задают расширение. Именно использование расширений позволяет спецификации FHIR сохранять простоту для всех.",
      "alias" : ["extensions",
      "user content"],
      "min" : 0,
      "max" : "*",
      "base" : {
        "path" : "DomainResource.extension",
        "min" : 0,
        "max" : "*"
      },
      "type" : [{
        "code" : "Extension"
      }],
      "isModifier" : false,
      "isSummary" : false,
      "mapping" : [{
        "identity" : "rim",
        "map" : "N/A"
      }]
    },
    {
      "id" : "DeviceMetric.modifierExtension",
      "path" : "DeviceMetric.modifierExtension",
      "short" : "Расширения, которые нельзя игнорировать",
      "definition" : "May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.\n\nModifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).",
      "comment" : "Не должно быть никаких предрассудков по использованию расширений любыми приложениями, проектами или стандартами - вне зависимости от учреждения или юрисдикции, которые используют или задают расширение. Именно использование расширений позволяет спецификации FHIR сохранять простоту для всех.",
      "alias" : ["extensions",
      "user content"],
      "min" : 0,
      "max" : "*",
      "base" : {
        "path" : "DomainResource.modifierExtension",
        "min" : 0,
        "max" : "*"
      },
      "type" : [{
        "code" : "Extension"
      }],
      "isModifier" : true,
      "isModifierReason" : "Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them",
      "isSummary" : false,
      "mapping" : [{
        "identity" : "rim",
        "map" : "N/A"
      }]
    },
    {
      "id" : "DeviceMetric.identifier",
      "path" : "DeviceMetric.identifier",
      "short" : "Instance identifier",
      "definition" : "Unique instance identifiers assigned to a device by the device or gateway software, manufacturers, other organizations or owners. For example: handle ID.",
      "comment" : "For identifiers assigned to a device by the device or gateway software, the `system` element of the identifier should be set to the unique identifier of the device.",
      "min" : 0,
      "max" : "*",
      "base" : {
        "path" : "DeviceMetric.identifier",
        "min" : 0,
        "max" : "*"
      },
      "type" : [{
        "code" : "Identifier"
      }],
      "isModifier" : false,
      "isSummary" : true,
      "mapping" : [{
        "identity" : "w5",
        "map" : "FiveWs.identifier"
      }]
    },
    {
      "id" : "DeviceMetric.type",
      "path" : "DeviceMetric.type",
      "short" : "Identity of metric, for example Heart Rate or PEEP Setting",
      "definition" : "Describes the type of the metric. For example: Heart Rate, PEEP Setting, etc.",
      "comment" : "DeviceMetric.type can be referred to either IEEE 11073-10101 or LOINC.",
      "min" : 1,
      "max" : "1",
      "base" : {
        "path" : "DeviceMetric.type",
        "min" : 1,
        "max" : "1"
      },
      "type" : [{
        "code" : "CodeableConcept"
      }],
      "isModifier" : false,
      "isSummary" : true,
      "binding" : {
        "extension" : [{
          "url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
          "valueString" : "MetricType"
        }],
        "strength" : "preferred",
        "description" : "Describes the metric type.",
        "valueSet" : "http://hl7.org/fhir/ValueSet/devicemetric-type"
      },
      "mapping" : [{
        "identity" : "w5",
        "map" : "FiveWs.class"
      }]
    },
    {
      "id" : "DeviceMetric.unit",
      "path" : "DeviceMetric.unit",
      "short" : "Unit of Measure for the Metric",
      "definition" : "Describes the unit that an observed value determined for this metric will have. For example: Percent, Seconds, etc.",
      "comment" : "DeviceMetric.unit can refer to either UCUM or preferable a RTMMS coding system.",
      "min" : 0,
      "max" : "1",
      "base" : {
        "path" : "DeviceMetric.unit",
        "min" : 0,
        "max" : "1"
      },
      "type" : [{
        "code" : "CodeableConcept"
      }],
      "isModifier" : false,
      "isSummary" : true,
      "binding" : {
        "extension" : [{
          "url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
          "valueString" : "MetricUnit"
        }],
        "strength" : "preferred",
        "description" : "Describes the unit of the metric.",
        "valueSet" : "http://hl7.org/fhir/ValueSet/devicemetric-type"
      }
    },
    {
      "id" : "DeviceMetric.source",
      "path" : "DeviceMetric.source",
      "short" : "Describes the link to the source Device",
      "definition" : "Describes the link to the  Device that this DeviceMetric belongs to and that contains administrative device information such as manufacturer, serial number, etc.",
      "min" : 0,
      "max" : "1",
      "base" : {
        "path" : "DeviceMetric.source",
        "min" : 0,
        "max" : "1"
      },
      "type" : [{
        "code" : "Reference",
        "targetProfile" : ["http://hl7.org/fhir/StructureDefinition/Device"]
      }],
      "isModifier" : false,
      "isSummary" : true
    },
    {
      "id" : "DeviceMetric.parent",
      "path" : "DeviceMetric.parent",
      "short" : "Describes the link to the parent Device",
      "definition" : "Describes the link to the  Device that this DeviceMetric belongs to and that provide information about the location of this DeviceMetric in the containment structure of the parent Device. An example would be a Device that represents a Channel. This reference can be used by a client application to distinguish DeviceMetrics that have the same type, but should be interpreted based on their containment location.",
      "min" : 0,
      "max" : "1",
      "base" : {
        "path" : "DeviceMetric.parent",
        "min" : 0,
        "max" : "1"
      },
      "type" : [{
        "code" : "Reference",
        "targetProfile" : ["http://hl7.org/fhir/StructureDefinition/Device"]
      }],
      "isModifier" : false,
      "isSummary" : true
    },
    {
      "id" : "DeviceMetric.operationalStatus",
      "path" : "DeviceMetric.operationalStatus",
      "short" : "on | off | standby | entered-in-error",
      "definition" : "Indicates current operational state of the device. For example: On, Off, Standby, etc.",
      "min" : 0,
      "max" : "1",
      "base" : {
        "path" : "DeviceMetric.operationalStatus",
        "min" : 0,
        "max" : "1"
      },
      "type" : [{
        "code" : "code"
      }],
      "isModifier" : false,
      "isSummary" : true,
      "binding" : {
        "extension" : [{
          "url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
          "valueString" : "DeviceMetricOperationalStatus"
        }],
        "strength" : "required",
        "description" : "Describes the operational status of the DeviceMetric.",
        "valueSet" : "http://hl7.org/fhir/ValueSet/metric-operational-status"
      }
    },
    {
      "id" : "DeviceMetric.color",
      "path" : "DeviceMetric.color",
      "short" : "black | red | green | yellow | blue | magenta | cyan | white",
      "definition" : "Описывает цветовое представление показателя. Часто используется для помощи клиницистам в отслеживании и идентификации типов параметров по цвету. На практике рассмотрим пример с монитором пациента, на который выводится ЭКГ/ЧСС и объём крови в сосудах; эти параметры отображаются разными характерными цветами, например ЧСС - синим, кровяное давление - зелёным, пульс и насыщенность кислородом - пурпурным.",
      "min" : 0,
      "max" : "1",
      "base" : {
        "path" : "DeviceMetric.color",
        "min" : 0,
        "max" : "1"
      },
      "type" : [{
        "code" : "code"
      }],
      "isModifier" : false,
      "isSummary" : true,
      "binding" : {
        "extension" : [{
          "url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
          "valueString" : "DeviceMetricColor"
        }],
        "strength" : "required",
        "description" : "Describes the typical color of representation.",
        "valueSet" : "http://hl7.org/fhir/ValueSet/metric-color"
      }
    },
    {
      "id" : "DeviceMetric.category",
      "path" : "DeviceMetric.category",
      "short" : "measurement | setting | calculation | unspecified",
      "definition" : "Обозначает категорию процесса генерации наблюдения. DeviceMetric может быть, к примеру, настройкой, измерением или вычислением.",
      "min" : 1,
      "max" : "1",
      "base" : {
        "path" : "DeviceMetric.category",
        "min" : 1,
        "max" : "1"
      },
      "type" : [{
        "code" : "code"
      }],
      "isModifier" : false,
      "isSummary" : true,
      "binding" : {
        "extension" : [{
          "url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
          "valueString" : "DeviceMetricCategory"
        }],
        "strength" : "required",
        "description" : "Describes the category of the metric.",
        "valueSet" : "http://hl7.org/fhir/ValueSet/metric-category"
      },
      "mapping" : [{
        "identity" : "w5",
        "map" : "FiveWs.class"
      }]
    },
    {
      "id" : "DeviceMetric.measurementPeriod",
      "path" : "DeviceMetric.measurementPeriod",
      "short" : "Describes the measurement repetition time",
      "definition" : "Описывает время повторения измерения. Не обязательно должно совпадать с периодом обновления. Время повторения измерения может колебаться от миллисекунд до часов. Примером времени повторения измерения в миллисекундах будет частота дискретизации ЭКГ. Примером времени повторения измерения в часах будет неинвазивное артериальное давление, которое выполняется автоматически каждый час. Период обновления может отличаться от времени повторения измерения, если устройство не обновляет публикуемое наблюдаемое значение с той же частотой, с которой измеряет его.",
      "min" : 0,
      "max" : "1",
      "base" : {
        "path" : "DeviceMetric.measurementPeriod",
        "min" : 0,
        "max" : "1"
      },
      "type" : [{
        "code" : "Timing"
      }],
      "isModifier" : false,
      "isSummary" : true
    },
    {
      "id" : "DeviceMetric.calibration",
      "path" : "DeviceMetric.calibration",
      "short" : "Describes the calibrations that have been performed or that are required to be performed",
      "definition" : "Describes the calibrations that have been performed or that are required to be performed.",
      "min" : 0,
      "max" : "*",
      "base" : {
        "path" : "DeviceMetric.calibration",
        "min" : 0,
        "max" : "*"
      },
      "type" : [{
        "code" : "BackboneElement"
      }],
      "constraint" : [{
        "key" : "ele-1",
        "severity" : "error",
        "human" : "All FHIR elements must have a @value or children",
        "expression" : "hasValue() or (children().count() > id.count())",
        "xpath" : "@value|f:*|h:div",
        "source" : "Element"
      }],
      "isModifier" : false,
      "isSummary" : true
    },
    {
      "id" : "DeviceMetric.calibration.id",
      "path" : "DeviceMetric.calibration.id",
      "representation" : ["xmlAttr"],
      "short" : "xml:id (or equivalent in JSON)",
      "definition" : "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.",
      "min" : 0,
      "max" : "1",
      "base" : {
        "path" : "Element.id",
        "min" : 0,
        "max" : "1"
      },
      "type" : [{
        "code" : "string"
      }],
      "isModifier" : false,
      "isSummary" : false,
      "mapping" : [{
        "identity" : "rim",
        "map" : "n/a"
      }]
    },
    {
      "id" : "DeviceMetric.calibration.extension",
      "path" : "DeviceMetric.calibration.extension",
      "short" : "Additional content defined by implementations",
      "definition" : "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance  applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.",
      "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
      "alias" : ["extensions",
      "user content"],
      "min" : 0,
      "max" : "*",
      "base" : {
        "path" : "Element.extension",
        "min" : 0,
        "max" : "*"
      },
      "type" : [{
        "code" : "Extension"
      }],
      "isModifier" : false,
      "isSummary" : false,
      "mapping" : [{
        "identity" : "rim",
        "map" : "n/a"
      }]
    },
    {
      "id" : "DeviceMetric.calibration.modifierExtension",
      "path" : "DeviceMetric.calibration.modifierExtension",
      "short" : "Extensions that cannot be ignored even if unrecognized",
      "definition" : "May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.\n\nModifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).",
      "comment" : "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions.  The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
      "alias" : ["extensions",
      "user content",
      "modifiers"],
      "min" : 0,
      "max" : "*",
      "base" : {
        "path" : "BackboneElement.modifierExtension",
        "min" : 0,
        "max" : "*"
      },
      "type" : [{
        "code" : "Extension"
      }],
      "isModifier" : true,
      "isModifierReason" : "Modifier extensions are expected to modify the meaning or interpretation of the element that contains them",
      "isSummary" : true,
      "mapping" : [{
        "identity" : "rim",
        "map" : "N/A"
      }]
    },
    {
      "id" : "DeviceMetric.calibration.type",
      "path" : "DeviceMetric.calibration.type",
      "short" : "unspecified | offset | gain | two-point",
      "definition" : "Describes the type of the calibration method.",
      "min" : 0,
      "max" : "1",
      "base" : {
        "path" : "DeviceMetric.calibration.type",
        "min" : 0,
        "max" : "1"
      },
      "type" : [{
        "code" : "code"
      }],
      "isModifier" : false,
      "isSummary" : true,
      "binding" : {
        "extension" : [{
          "url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
          "valueString" : "DeviceMetricCalibrationType"
        }],
        "strength" : "required",
        "description" : "Describes the type of a metric calibration.",
        "valueSet" : "http://hl7.org/fhir/ValueSet/metric-calibration-type"
      }
    },
    {
      "id" : "DeviceMetric.calibration.state",
      "path" : "DeviceMetric.calibration.state",
      "short" : "not-calibrated | calibration-required | calibrated | unspecified",
      "definition" : "Describes the state of the calibration.",
      "min" : 0,
      "max" : "1",
      "base" : {
        "path" : "DeviceMetric.calibration.state",
        "min" : 0,
        "max" : "1"
      },
      "type" : [{
        "code" : "code"
      }],
      "isModifier" : false,
      "isSummary" : true,
      "binding" : {
        "extension" : [{
          "url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
          "valueString" : "DeviceMetricCalibrationState"
        }],
        "strength" : "required",
        "description" : "Describes the state of a metric calibration.",
        "valueSet" : "http://hl7.org/fhir/ValueSet/metric-calibration-state"
      }
    },
    {
      "id" : "DeviceMetric.calibration.time",
      "path" : "DeviceMetric.calibration.time",
      "short" : "Describes the time last calibration has been performed",
      "definition" : "Describes the time last calibration has been performed.",
      "min" : 0,
      "max" : "1",
      "base" : {
        "path" : "DeviceMetric.calibration.time",
        "min" : 0,
        "max" : "1"
      },
      "type" : [{
        "code" : "instant"
      }],
      "isModifier" : false,
      "isSummary" : true
    }]
  },
  "differential" : {
    "element" : [{
      "id" : "DeviceMetric",
      "path" : "DeviceMetric",
      "short" : "Измерение, вычисление или возможные настройки медицинского изделия",
      "definition" : "Describes a measurement, calculation or setting capability of a medical device.",
      "comment" : "For the initial scope, this DeviceMetric resource is only applicable to describe a single metric node in the containment tree that is produced by the context scanner in any medical device that implements or derives from the ISO/IEEE 11073 standard.",
      "min" : 0,
      "max" : "*"
    },
    {
      "id" : "DeviceMetric.identifier",
      "path" : "DeviceMetric.identifier",
      "short" : "Instance identifier",
      "definition" : "Unique instance identifiers assigned to a device by the device or gateway software, manufacturers, other organizations or owners. For example: handle ID.",
      "comment" : "For identifiers assigned to a device by the device or gateway software, the `system` element of the identifier should be set to the unique identifier of the device.",
      "min" : 0,
      "max" : "*",
      "type" : [{
        "code" : "Identifier"
      }],
      "isSummary" : true,
      "mapping" : [{
        "identity" : "w5",
        "map" : "FiveWs.identifier"
      }]
    },
    {
      "id" : "DeviceMetric.type",
      "path" : "DeviceMetric.type",
      "short" : "Identity of metric, for example Heart Rate or PEEP Setting",
      "definition" : "Describes the type of the metric. For example: Heart Rate, PEEP Setting, etc.",
      "comment" : "DeviceMetric.type can be referred to either IEEE 11073-10101 or LOINC.",
      "min" : 1,
      "max" : "1",
      "type" : [{
        "code" : "CodeableConcept"
      }],
      "isSummary" : true,
      "binding" : {
        "extension" : [{
          "url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
          "valueString" : "MetricType"
        }],
        "strength" : "preferred",
        "description" : "Describes the metric type.",
        "valueSet" : "http://hl7.org/fhir/ValueSet/devicemetric-type"
      },
      "mapping" : [{
        "identity" : "w5",
        "map" : "FiveWs.class"
      }]
    },
    {
      "id" : "DeviceMetric.unit",
      "path" : "DeviceMetric.unit",
      "short" : "Unit of Measure for the Metric",
      "definition" : "Describes the unit that an observed value determined for this metric will have. For example: Percent, Seconds, etc.",
      "comment" : "DeviceMetric.unit can refer to either UCUM or preferable a RTMMS coding system.",
      "min" : 0,
      "max" : "1",
      "type" : [{
        "code" : "CodeableConcept"
      }],
      "isSummary" : true,
      "binding" : {
        "extension" : [{
          "url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
          "valueString" : "MetricUnit"
        }],
        "strength" : "preferred",
        "description" : "Describes the unit of the metric.",
        "valueSet" : "http://hl7.org/fhir/ValueSet/devicemetric-type"
      }
    },
    {
      "id" : "DeviceMetric.source",
      "path" : "DeviceMetric.source",
      "short" : "Describes the link to the source Device",
      "definition" : "Describes the link to the  Device that this DeviceMetric belongs to and that contains administrative device information such as manufacturer, serial number, etc.",
      "min" : 0,
      "max" : "1",
      "type" : [{
        "code" : "Reference",
        "targetProfile" : ["http://hl7.org/fhir/StructureDefinition/Device"]
      }],
      "isSummary" : true
    },
    {
      "id" : "DeviceMetric.parent",
      "path" : "DeviceMetric.parent",
      "short" : "Describes the link to the parent Device",
      "definition" : "Describes the link to the  Device that this DeviceMetric belongs to and that provide information about the location of this DeviceMetric in the containment structure of the parent Device. An example would be a Device that represents a Channel. This reference can be used by a client application to distinguish DeviceMetrics that have the same type, but should be interpreted based on their containment location.",
      "min" : 0,
      "max" : "1",
      "type" : [{
        "code" : "Reference",
        "targetProfile" : ["http://hl7.org/fhir/StructureDefinition/Device"]
      }],
      "isSummary" : true
    },
    {
      "id" : "DeviceMetric.operationalStatus",
      "path" : "DeviceMetric.operationalStatus",
      "short" : "on | off | standby | entered-in-error",
      "definition" : "Indicates current operational state of the device. For example: On, Off, Standby, etc.",
      "min" : 0,
      "max" : "1",
      "type" : [{
        "code" : "code"
      }],
      "isSummary" : true,
      "binding" : {
        "extension" : [{
          "url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
          "valueString" : "DeviceMetricOperationalStatus"
        }],
        "strength" : "required",
        "description" : "Describes the operational status of the DeviceMetric.",
        "valueSet" : "http://hl7.org/fhir/ValueSet/metric-operational-status"
      }
    },
    {
      "id" : "DeviceMetric.color",
      "path" : "DeviceMetric.color",
      "short" : "black | red | green | yellow | blue | magenta | cyan | white",
      "definition" : "Описывает цветовое представление показателя. Часто используется для помощи клиницистам в отслеживании и идентификации типов параметров по цвету. На практике рассмотрим пример с монитором пациента, на который выводится ЭКГ/ЧСС и объём крови в сосудах; эти параметры отображаются разными характерными цветами, например ЧСС - синим, кровяное давление - зелёным, пульс и насыщенность кислородом - пурпурным.",
      "min" : 0,
      "max" : "1",
      "type" : [{
        "code" : "code"
      }],
      "isSummary" : true,
      "binding" : {
        "extension" : [{
          "url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
          "valueString" : "DeviceMetricColor"
        }],
        "strength" : "required",
        "description" : "Describes the typical color of representation.",
        "valueSet" : "http://hl7.org/fhir/ValueSet/metric-color"
      }
    },
    {
      "id" : "DeviceMetric.category",
      "path" : "DeviceMetric.category",
      "short" : "measurement | setting | calculation | unspecified",
      "definition" : "Обозначает категорию процесса генерации наблюдения. DeviceMetric может быть, к примеру, настройкой, измерением или вычислением.",
      "min" : 1,
      "max" : "1",
      "type" : [{
        "code" : "code"
      }],
      "isSummary" : true,
      "binding" : {
        "extension" : [{
          "url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
          "valueString" : "DeviceMetricCategory"
        }],
        "strength" : "required",
        "description" : "Describes the category of the metric.",
        "valueSet" : "http://hl7.org/fhir/ValueSet/metric-category"
      },
      "mapping" : [{
        "identity" : "w5",
        "map" : "FiveWs.class"
      }]
    },
    {
      "id" : "DeviceMetric.measurementPeriod",
      "path" : "DeviceMetric.measurementPeriod",
      "short" : "Describes the measurement repetition time",
      "definition" : "Описывает время повторения измерения. Не обязательно должно совпадать с периодом обновления. Время повторения измерения может колебаться от миллисекунд до часов. Примером времени повторения измерения в миллисекундах будет частота дискретизации ЭКГ. Примером времени повторения измерения в часах будет неинвазивное артериальное давление, которое выполняется автоматически каждый час. Период обновления может отличаться от времени повторения измерения, если устройство не обновляет публикуемое наблюдаемое значение с той же частотой, с которой измеряет его.",
      "min" : 0,
      "max" : "1",
      "type" : [{
        "code" : "Timing"
      }],
      "isSummary" : true
    },
    {
      "id" : "DeviceMetric.calibration",
      "path" : "DeviceMetric.calibration",
      "short" : "Describes the calibrations that have been performed or that are required to be performed",
      "definition" : "Describes the calibrations that have been performed or that are required to be performed.",
      "min" : 0,
      "max" : "*",
      "type" : [{
        "code" : "BackboneElement"
      }],
      "isSummary" : true
    },
    {
      "id" : "DeviceMetric.calibration.type",
      "path" : "DeviceMetric.calibration.type",
      "short" : "unspecified | offset | gain | two-point",
      "definition" : "Describes the type of the calibration method.",
      "min" : 0,
      "max" : "1",
      "type" : [{
        "code" : "code"
      }],
      "isSummary" : true,
      "binding" : {
        "extension" : [{
          "url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
          "valueString" : "DeviceMetricCalibrationType"
        }],
        "strength" : "required",
        "description" : "Describes the type of a metric calibration.",
        "valueSet" : "http://hl7.org/fhir/ValueSet/metric-calibration-type"
      }
    },
    {
      "id" : "DeviceMetric.calibration.state",
      "path" : "DeviceMetric.calibration.state",
      "short" : "not-calibrated | calibration-required | calibrated | unspecified",
      "definition" : "Describes the state of the calibration.",
      "min" : 0,
      "max" : "1",
      "type" : [{
        "code" : "code"
      }],
      "isSummary" : true,
      "binding" : {
        "extension" : [{
          "url" : "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
          "valueString" : "DeviceMetricCalibrationState"
        }],
        "strength" : "required",
        "description" : "Describes the state of a metric calibration.",
        "valueSet" : "http://hl7.org/fhir/ValueSet/metric-calibration-state"
      }
    },
    {
      "id" : "DeviceMetric.calibration.time",
      "path" : "DeviceMetric.calibration.time",
      "short" : "Describes the time last calibration has been performed",
      "definition" : "Describes the time last calibration has been performed.",
      "min" : 0,
      "max" : "1",
      "type" : [{
        "code" : "instant"
      }],
      "isSummary" : true
    }]
  }
}

Примечание к использованию: мы очень стараемся приводить корректные и полезные примеры, но нормативно они не являются частью спецификации.